Item List : | ||
| 618 Fontana Zacinto (4 piece) | ||
| 1x | 619 | Fontana Zacinto Top Piece |
| 1x | 620 | Fontana Zacinto Small Bowl |
| 1x | 621 | Fontana Zacinto Elevator |
| 1x | 622 | Fontana Zacinto Basin and Stand |
| 1x | 623 | Pumphousing small with cover |
| 1x | 903 | Waterfall 1500 Pump |
Materials Needed : | ||
| 250ml White PVA paint | ||
| Small Tube Silicone sealant | ||
| 3kg Plastersand and 3kg Cement | ||
| 1,2mx20mm diameter hosepipe | ||
Tools Needed : | ||
| Paint Brush | ||
-
Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your own setting.
- Firstly the fountain must stand on level, compacted ground.
- The electrical box must be placed close to the outside of the base of the fountain, in a concealed position.
- Pass the electrical cord through the Basin and Stand (622) to the connecting box, allowing for 10-20cm slack, and seal with silicone sealant.
- The Pumphousing small (623) will be placed in Basin (622) and the Elevator (621) will sit ontop.
- Cement the Small Bowl (620) evenly onto the Elevator (621).
- Slide the hosepipe from the Elevator (621) through the Small Bowl (620).
- Place Top Piece (619) onto the Small Bowl (620), also sliding the hosepipe through. (Before the top part goes on, cut the hose off at +-5cm from the Small Bowl (620) and silicone seal the pipe at the top of the Small Bowl. This will prevent a backflow of water).