Item List | ||
| 771 Fontana Trieste (4 parts) | ||
| H=135cm W=87cm Dia=48cm | ||
| Weight=162,5kg | ||
| 1x | 31 | Repina Putto (large) |
| 1x | 865 | Repina Elevator (with hole) |
| 1x | 769 | Trieste Stand |
| 1x | 770 | Bacino Trieste |
| 1x | 913 | Waterfall 700 Pump |
Materials Needed | ||
| 1m Hosepipe 20mm Diameter | ||
| 8 Wooden Wedges (10mmx50mm) | ||
| Plastersand and Cement | ||
| 3mm Masonary Drillbit | ||
| 1 Elbow 12mm | ||
| 1 Small Tube of Silicone Sealant | ||
Tools | ||
| Trowel | ||
| Spirit Level | ||
-
Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your setting.
- A power outlet must be established near the fountain. To ensure safety regulations are met an electrician is needed to assist with the running of the conduit pipe from the connecting box to the electrical distribution point.
- Make sure the fountain is placed on ground that is compact and level.
- Place the Trieste stand (769) onto compacted ground.
- Drill a hole in the Bacino Trieste (770) for pump cable to go through.
- Position the Bacino Trieste (770) ontop of the Trieste Stand (769) using the wooden wedges to level it.
- Once level, apply Cement between the Bacino Trieste (770) and Trieste stand (769). Once dry, remove wooden wedges and fill void with Cement.
- Feed cable through Trieste Stand (769) and Bacino Trieste (770). Seal both holes with Silicone Sealant to prevent backflow.
- Place Repina Elevator (865) into the middle of Bacino Trieste (770) and cement together.
- Place Waterfall 700 Pump (913) into Repina Elevator (865) and connect to hosepipe coming out of Elevator.
- Place Repina Putto (31) ontop of Elevator (865).
- Feed hosepipe through the Repina Elevator (865) and Repina Putto (31). Seal bottom of Putto and hosepipe with silicone sealant to prevent back flow.
- Allow 24hrs for Silicone and Cement to dry before filling fountain with water.