Installation: Mini Fountain - 6 sided base (Item no 94)
Item List : |
| 94 Mini Fountain |
| H =60cm Dia =49cm |
| Weight =20kg |
| 1x | 49 | Mini Fountain |
| 1x | 19 | Tropea Egg |
| 1x | 278 | Vitinia Dam |
| 1x | 12 | Six Sided Base |
Materials Needed : |
| Conduit Pipe |
| Hosepipe |
| Silcone Sealant |
| Plastersand and cement |
| Waterfall 700 Pump |
| 90'elbow |
Tools Needed : |
| Spirit Level
|
Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation procedures as easy as possible for you with this installation pamphlet,so that you can enjoy this magnificent water feature in your own setting.
Installation :
- Make sure the ground has been compacted and is level.
- Place Vitinia Dam (278) on the ground and place six sided base (12) inside the dam.
- The electrical box must be situated close to the dam.
- Place the Mini fountain (49) ontop of the six sided
base, but first run conduit pipe through the centre
of the fountain. Feed the hose piping through the
fountain and at the bottom attach a 90'elbow. Connect
the pump wire to this. Cement Mini fountain (49)
onto six sided base (12).
- Cut the hose pipe off leaving +-5cm sticking out
at the top and silicone seal around it, to prevent
the backflow of water.
- Place the Tropea egg (19) ontop of the Mini fountain (49)
and cement together.
- Fill the dam with water and turn pump on.
