Installation: Mezzaluna Dam (Item no 121)
    click to enlarge

    Item List :

    121 Mezzaluna Dam
    H =28cm W =137cm D =67cm
    Weight =107kg

    Materials Needed :

    1 Tube Silicone Sealant
    2 Elbows
    Hosepipe

    Tools :

    Spirit Level
    Masonary Drill
    Angle Grinder


      Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation procedures as easy as possible for you with this installation pamphlet,so that you can enjoy this magnificent water feature in your own setting.

      Installation :

    1. This dam is to be placed against a wall.
    2. Make sure that you place the dam on level, compacted ground.
      This can be used with a number of different gargoyles which you can place at a preferred height, namely: Mascarone Leono, or Fontana Concordia Face, or Devil's Mask, or Jupiter Mask, or Lions Mask (small), or Lions Mask (large).
    3. Chase wall with an Angle grinder, to position hosepipe in.
    4. Pre drill two holes on flat part of the Mezzaluna Dam.
    5. Place hosepipe in chased wall.
    6. Fill plaster in the chased section of the wall.
    7. Put an Elbow on both ends of hosepipe (top elbow to connect to top part of fountain piece).
    8. Put a short piece of hosepipe on top other end of elbow (adjust length according to your gargoyle).
    9. Position bottom elbow into pre drilled hole and connect to pump.
    10. Feed electrical pump cord out second pre drilled hole, to an electrical power box.
    11. Consult an electrician for advice on electrical connections.
    12. Paint where applicable.




    Please also look at the Installation Diagram for help!