Item List : | ||
| 852 Fontana Lisiera | ||
| H =2.6m W =1.28cm | ||
| D =1.28 Weight =506.5kg | ||
| 1x | 589 | Fontana Agrigento Base |
| 1x | 588 | Fontana Agrigento Base Cover |
| 1x | 587 | Fontana Agrigento Big Bowl |
| 1x | 624 | Pumphousing |
| 1x | 322 | Venere Lisiera |
| 1x | 903 | Waterfall 1500 Pump (Option A See below) |
| 1x | 921 | Waterfall 2400 Pump (Option B See below) |
| 1x | 903 | Waterfall 1500 Pump (Option C See below) |
| 1x | 921 | Waterfall 2400 Pump (Option C See below) |
Materials Needed : | ||
| Plastersand and cement | ||
| 2.5m Hosepipe | ||
| Wooden Wedges | ||
| 1 Tube Silicone Sealant | ||
| White PVA paint | ||
Tools Needed : | ||
| Spirit Level | ||
| Paint brush | ||
-
Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your own setting.
- Level and compact a piece of ground 2m in diameter.
- Place Fontana Agrigento Base (589) on compacted level area or in Dam. Please refer to installation of Dam Monaco 16 parts or refer to installation of Dam Arcara 16 parts (Plain Coping) or refer to installation of Dam Positano 12 parts
- Place Fontana Agrigento Big Bowl (587) ontop of Base (589).
- Place the Pumphousing (624) ontop of Agrigento Big Bowl and level with Wooden Wedges.
- Place the Venere Lisiera (322) ontop of Pumphousing (624). Level with Wooden Wedges.
- Place the Fontana Agrigento Base Cover (588) into recess.
- Ensure electrical connections are correctly waterproofed with silicone sealant - consult an electrician for advice.
- Wait 24hrs to let sealant set before using the fountain. Fill water into fountain and switch on pump. Observe cascading of water. Move wedges until water flows evenly from all sides. Switch off pump and remove water from fountain.
- Put cement in between wedges. When cement is dry, remove wedges and fill void.
- Paint over cement using antique method.
- Fill with water - now ready to use.
- NOTE: (Option A) This fountain can be installed as stand alone, using (903) Waterfall 1500 Pump - This option is only for water flow out of the ball; or (Option B) This fountain can be installed as stand alone, using (921) Waterfall 2400 Pump - This option is only for water flow out of the top; or (Option C) as for use in a dam, using 1x(921) Waterfall 2400 pump and 1x(903) Waterfall 1500 Pump - This option can be used with water flow out ball and top.