Item List : | ||
| 631 Fontana Lerna (5 piece) | ||
| H=252cm Dia=15cm | ||
| Weight=673kg | ||
| 1x | 578 | Idra Di Lerna Statue |
| 1x | 625 | Pumphousing Di Nasso With Cover |
| 1x | 615 | Fontana Di Nasso Bowl |
| 1x | 616 | Fontana Di Nasso Base Cover |
| 1x | 617 | Fontana Di Nasso Base |
| 1x | 903 | Waterfall 1500 Pump |
| 1x | 913 | Waterfall 700 Pump |
Materials Needed : | ||
| Plastersand and cement | ||
| 4 Wooden Wedges (10mmx50mm) | ||
| Small Tube of Silicone Sealant | ||
Tools : | ||
| Trowel | ||
| Spirit Level | ||
-
Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your setting.
- Firstly make sure the ground where it is to be placed is compacted.
- Your electrical connecting box will be placed inside of Fontana Di Nasso Base (716).
- Cement the Fontana Di Nasso Base (617) to the Fontana Di Nasso Bowl (615) making sure it is level, using wooden wedges.
- The two pumps must be placed into Pumphousing Di Nasso (625) which is in the centre of the Fontana Di Nasso Bowl (615). The pump cords must be taken through the centre of the bowl to the connecting box, allowing for 10-20cm slack.
- Place the Idra Di Lerna Statue (578) ontop of the Pumphousing Di Nasso (625), level with wooden wedges and secure with cement. Connect the hosepipes from the Statue to the pumps. (Make sure hosepipe is not bent, otherwise water flow will be interupted).
- Contact an electrician to assist in connection of wires.
- (Optional to use 1 or 2 outlets).
(Do not attempt to use a stronger pump instead of 2 pumps, for the 2 hosepipes. This can lead to complications whereby there is an imbalance of water flow).