Installation: Fontana Calliope (4 parts) (Item no 768)
    click

    Item List

    768 Fontana Calliope
    H=101cm W=134cm
    Depth=9cm Weight=394.5kg
    1x764Venere Calliope
    1x765Halfdam Gerona
    1x766Base Calliope
    1x767Door for Base Calliope
    1x913Waterfall 700 Pump

    Materials Needed

    1.5mx20mm Hosepipe
    8 Wooden Wedges 10x50mm
    Plastersand and Cement
    1 Tube Silicone Sealant
    1 Irragation T-joint

    Tools

    Trowel
    Spirit Level
    8mm Masonary Drill bit

      Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your setting.

        Installation

      1. Place Halfdam Gemona (765) against wall, on compacted ground.
      2. Place Base Calliope (766) in Centre of Halfdam Gemona.
      3. Feed Hose through centre of Base Calliope (766).
      4. Level and cement together.
      5. Ensure there is enough Hosepipe to connect pump.
      6. Connect the two pipes from the Venere Calliope (764) with the T-joint.
      7. Insert Hosepipe into bottom of Venere Calliope (764).
      8. Place ontop of Base Calliope (766). Level and secure with Cement.
      9. Drill a hole on side of Halfdam Gemona (765) to feed pump wire through. Seal with Silicone to prevent leakage.
      10. Place Pump into Base Calliope (766) and cut off excess hosepipe.
      11. Connect to a Power supply.
      12. Insert Door for Base Calliope (767) into Base recess.
      13. Leave fountain for 24hrs to allow Silicone and Cement to set.


        Please also look at the Installation Diagram for help!