Item List: | ||
| 853 Fontana Aurelia (without face) | ||
| H=1.18cm W=1.1cm | ||
| Weight=199kg | ||
| 1x | 611 | Fontana Concordia Top Part (no face) |
| 1x | 674 | Cassetta Aurelia |
| 1x | 913 | Waterfall 700 Pump |
Materials Needed; | ||
| Hosepipe 1mx20mm | ||
| Wooden Wedges | ||
| Plastersand and Cement | ||
| 3x 90'elbows 12mm Diameter | ||
| 2x M8x100mm Fisher Plugs | ||
Tools: | ||
| 8mm Drill Bit | ||
| 14mm Drill Bit | ||
| Angle Grinder | ||
| Spirit Level | ||
| Trowel | ||
-
Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your own setting.
- Ensure ground is level and compact.
- Find the centre of the fountain in order to establish where the slot must be grinded into the wall.
- Grind a slot into the wall making sure the slot starts just below the top of the Cassetta Aurelia (674) upto the spout found on the rosette.
- Once the slot is made place Concordia Top part (611) onto Cassetta Aurelia (674) and cement together.
- Put the hosepipe through the slot, connecting to the elbows at each end.
- Pull the hosepipe through the spout and once again attach an elbow to the end of the hosepipe.
- You then need to drill 8mm holes on either side of the rossette.
- Using a 14mm drill bit you can countersink your 8mm holes +/- 5mm deep.
- Insert your fisher plugs using your hammer. Ensure not to knock them completely in the last bit you can use a screwdriver to secure the fisher plugs.
- The Waterfall 700 Pump (913) sits inside the Cassetta Aurelia (674) and is connected to the hosepipe.
- Wait 24hrs to allow cement to dry before using the fountain.