Installation: Fontana Aurelia (with face) (Item no 855)

    click

    Item List:

    855 Fontana Aurelia (with face)
    H=1.18cm W=1.1cm
    Weight=199kg
    1x614Fontana Concordia Top Part (with face)
    1x674Cassetta Aurelia
    1x913Waterfall 700 Pump

    Materials Needed;

    Hosepipe 1mx20mm
    Wooden Wedges
    Plastersand and Cement
    3x 90'elbows 12mm Diameter
    2x M8x100mm Fisher Plugs

    Tools:

    8mm Drill Bit
    14mm Drill Bit
    Angle Grinder
    Spirit Level
    Trowel

      Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your own setting.

        Installation

      1. Ensure ground is level and compact.
      2. Find the centre of the fountain in order to establish where the slot must be grinded into the wall.
      3. Grind a slot into the wall making sure the slot starts just below the top of the Cassetta Aurelia (674) upto the spout found on the face.
      4. Once the slot is made place Concordia Top part (614) onto Cassetta Aurelia (674) and cement together.
      5. Put the hosepipe through the slot, connecting to the elbows at each end.
      6. Pull the hosepipe through the spout and once again attach an elbow to the end of the hosepipe.
      7. You then need to drill 8mm holes on either side of the face.
      8. Using a 14mm drill bit you can countersink your 8mm holes +/- 5mm deep.
      9. Insert your fisher plugs using your hammer. Ensure not to knock them completely in the last bit you can use a screwdriver to secure the fisher plugs.
      10. The Waterfall 700 Pump (913) sits inside the Cassetta Aurelia (674) and is connected to the hosepipe.
      11. Wait 24hrs to allow cement to dry before using the fountain.

        Please also look at the Installation Diagram for help!