Installation: Fontana Aragona (10 parts) (Item no 782)
    click

    Item List

    782 Fontana Aragona
    H=203cm Dia=22cm
    Weight=541.5kg Width=145cm
    1x699Base Ovuli
    1x722Pigna Aragona
    1x776Bacino Aragona
    1x777Small Layer Aragona
    1x778Medium Layer Aragona
    1x779Pumphousing Aragona
    1x780Door Pumphousing Aragona
    3x781Arclip Aragona
    1x903Waterfall 1500 Pump

    Materials Needed

    Hosepipe
    8 Wooden Wedges 10mmx50mm
    Plastersand and Cement
    1 Tube Silicone Sealant
    Conduit 1.5mx20mm
    1x20mm Elbow
    1.5m Fishing Line

    Tools

    Trowel
    Spirit Level

      Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your setting.

        Installation

      1. Ensure ground is level and compact.
      2. Pre drill hole in Bacino Aragona (776)
      3. Position Base Ovuli (699) on ground, put elbow from electical box into Base Ovuli (699). Pull the Fishing line through box and base (so as to pull through the pump wire later on).
      4. Place Bacino Aragona (776) onto Base Ovuli (699). Pull Fishing line through hole of Bacino Aragona (776). Level with wooden wedges, and secure with cement.
      5. Place Pumphousing Aragona (779) onto Bacino Aragona (776). Secure with cement.
      6. Place Hosepipe into hole of Pumphousing Aragona (779) and seal with Silicone sealant.
      7. Slide Medium Layer Aragona (778) over hosepipe, onto Pumphousing Aragona (779). Level with wooden wedges and secure with cement.
      8. Slide Small Layer Aragona (777) over hosepipe onto Medium Layer Aragona. Level with wooden wedges and secure with cement.
      9. Slide Pigna Aragona (722) over hosepipe onto Small Layer Aragona (777). Level with wooden wedges and secure with cement.
      10. Cut off excess hosepipe on top of Pigna Aragona (722) (make it half the length of Pigna). Seal around edges of hosepipe with Silicone to prevent backflow.
      11. Route Pump wire through Bacino, using the Fish line routed before to pull through pump wire. Remember to seal hole with Silicone sealant.
      12. Place hosepipe onto Pump and put into Pumphousing (779). Place Door pumphousing (780) into recess of housing.
      13. Place Arclip Aragona pieces (781) onto Bacino Aragona (776) and secure with cement.
      14. Wait 24hrs for Sealant and Cement to set before fountain is used.


        Please also look at the Installation Diagram for help!