Installation: Fontana Anzio Small (with Murale Dam) (Item no 847)

    click

    Item List:

    847 Fontana Anzio Small (with Murale Dam)
    H=1.12cm Dia=1.12cm
    Weight=362kg
    1x655Murale Fulldam
    1x785Medium Layer Anzio
    1x784Small Layer Anzio
    1x726Pigna Anzio
    1x623Pumphousing
    1x903Waterfall 1500 Pump

    Materials Needed;

    Hosepipe 1,5x20mm Diameter
    Wooden Wedges
    Plastersand and Cement
    Silicone sealant
    1x20mm Elbow

    Tools:

    Spirit Level
    Trowel

      Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your own setting.

        Installation

      1. Ensure ground is level and compact.
      2. Position Murale Fulldam (655) on compact ground.
      3. Place Pumphousing (623) into Murale Fulldam. Secure with cement.
      4. Place Hosepipe into hole of Pumphousing and seal with Silicone Sealant.
      5. Slide Medium Layer Anzio (784) over hosepipe ontop of Pumphousing. Level with wooden wedges and secure with cement.
      6. Slide Small Layer Anzio (784) over hosepipe ontop of Medium Layer Anzio. Level with wooden wedges and secure with cement.
      7. Slide Pigna Anzio (726) over hosepipe and place on top of Small Layer Anzio (784). Cut off excess hosepipe and seal off edges between Pigna Anzio and and hosepipe with Silicone sealant to prevent backflow.
      8. Connect pump to the hose and position in Pumphousing. (Make sure hosepipe is not bent, otherwise will interrupt water flow). Ensure electrical connections are correctly waterproofed - consult an electrician for advice.
      9. Wait 24hrs to let Sealant set before using the fountain.

        Please also look at the Installation Diagram for help!