Installation: Fontana Anzio (Compact) (Item no 842)

    click

    Item List:

    842 Fontana Anzio (Compact)
    H=1.18cm Dia=1.05cm
    Width=34cm Weight=309kg
    1x827 Dam for Fountain
    1x841Big Layer Anzio (short)
    1x785Medium Layer Anzio
    1x784Small Layer Anzio
    1x726Pigna Anzio
    1x650Four sided base (Elevator for pipe)
    1x903Waterfall 1500 Pump

    Materials Needed;

    Hosepipe 1,5x20mm Diameter
    Wooden Wedges
    Plastersand and Cement
    Silicone sealant
    1x20mm Elbow

    Tools:

    Spirit Level
    Trowel

      Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your own setting.

        Installation

      1. Place Big Layer Anzio (short) (841) in Dam (70).
      2. Position hosepipe through hole in Big Layer Anzio (841). Seal off with silicone sealant.
      3. Slide Medium Layer Anzio (785) over hosepipe ontop of Big Layer Anzio. Level with wooden wedges. Secure with cement.
      4. Slide Small Layer Anzio (784) over hosepipe ontop of Medium Layer Anzio. Level with wooden wedges. Secure with cement.
      5. Slide Pigna Anzio (726) over hosepipe and place on top of Small Layer Anzio (784). Secure with cement. Cut off excess hosepipe and seal off edges between Pigna Anzio and hosepipe with Silicone Sealant to prevent backflow.
      6. Connect pump to the hose and position in Base. Put Door for Base (787) in recess. (Make sure hosepipe is not bent, otherwise will interrupt water flow). Ensure electrical connections are correctly waterproofed - consult an electrician for advice. Wait 24hrs to let Sealant set before using the fountain.

        Please also look at the Installation Diagram for help!