Installation: Fontana Agrigento - Small (Item no 627)
    click

    Item List :

    627 Fontana Agrigento Small
    1x584Fontana Agrigento Top Part
    1x585Fontana Agrigento Small Bowl
    1x623Pumphousing Small with Cover
    1x586Fontana Agrigento Medium Bowl
    1x461Idra Pump

    Optional :

    1x635Damring Sicilia

    Materials Needed :

    250ml White PVA paint (Dulux)
    Small Tube of Silicone Sealant
    Plastersand and Cement
    Conduit Pipe
    1m of 12mm Hosepipe

    Tools Needed :

    Paint Brush
    Spirit Level

      Thank you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificant water feature in your own setting.

      Installation :

      This can be used with: Damring Sicilia, if you do not use in complete Agrigento Fountain (583).

    1. For this fountain the waterproof connecting box must be placed as close to the outside base as possible. With the help of a qualified electrician, a conduit pipe must be run from this box to the electrical point.
    2. Remember the ground must be compacted to make sure the fountain stands level.
    3. Place Agrigento Pumphousing small (623) in Agrigento Medium bowl (586).
    4. On the outlet of the pump attach 1m hosepipe to it. Slide hose pipe through Agrigento small bowl (585). Cement can be used to attach the bowl base of (585) to medium bowl (586). N.B The bowls must be standing even.
    5. Before Agrigeno Top part (584) goes on, cut off hose +-5cm from Agrigento Small bowl (585) and silicone seal pipe at top of small bowl, to avoid backflow of water.
    6. Place Agrigento Top part (584) onto (585) and silicone it, to avoid side leakage.
    7. Allow for the silicone sealant and cement to dry for 24hrs before using fountain.


      Please also look at the Installation Diagram for help!