| 791 Dam Monaco (16 parts) | ||
| H=54cm Dia=0cm W=36cm | ||
| Weight=2272kg Depth=5cm | ||
Item List | ||
| 8x | 789 | Dam Segment Monaco |
| 8x | 790 | Curbing for Dam Monaco |
Materials Needed | ||
| 8 Flat Bars 20mmx5mmx200mm | ||
| 16 Fisher plugs 40mmx8mm | ||
| 2.1 Cubic meters of Plastersand and Cement | ||
| 8mm Masonary Drill bit | ||
| 8mm Steel Drill bit | ||
| Silicone Sealant | ||
| 2m Conduit | ||
| 10lt Pro-Long Waterproofing Paint | ||
| 8 Metal braces | ||
| Fishing line and wire pegs | ||
Tools | ||
| Hammer | ||
| Drilling Machine | ||
| Paint Brush | ||
| Spirit Level | ||
-
Thank-you for purchasing a Gardens of Italy quality product. We would like to make installation as easy as possible for you with this installation pamphlet, so that you can enjoy this magnificent water feature in your setting.
- Choose a level area where foundation must be laid. Mark out foundation with 4mm wire pegs and fishing line. Dig out foundation of 100mm deep and prepare cement mix using 2 parts river sand, 1 part 10mm stone and 1 part cement.
- Lay Conduit from perimeter of dam to centre (for electrical wire of pump).
- Lay foundation 100mm thick, making sure to include the PVC conduit pipe for electrical connection. While cement is still wet smooth down foundation to ensure a level area to work on.
- After initial period of 6 hours, hose down the foundation periodically to facilitate even setting of cement without cracking. -Every hour during daytime period. - Twice duing the nighttime period. This should be done for the next 18 hours.
- After the 24 hour setting and hardening period the curbing can be installed.
- Pre drill holes in Flat bar with drilling machine and steel drill bit.
- Put cement mix on outer section of foundation. Place curbing on perimeter of your foundation and clean off excess cement.
- Pre drill holes in Dam Segments (789) using the masonary drill bit. Place Dam segments together. Brace each with the other using the flat bar, fisher plugs and a hammer.
- Once the braces have been attached the inside of the Dam can be waterproofed with the Pro-Long waterproofing paint (3 coats). Read instructions on waterproofing.
- Ensure electrical connections are correctly waterproofed - consult an electrician for advice.
- Leave for 48 hours to dry. Now ready to fill with water.